Close

Rain Cap

This installation configuration is only an approximation. Please contact your contractor or your nearest dealer for complete instructions and list of all required parts.

Close

Type of support

Choose round or square mostly for esthetics purposes but with a pitched ceiling, we recommend a square support since the trim ring is more easily adjustable.

Close

Distance from base to offset

Measure the distance from the base of the installation to where the offset will start.

Close

Maximum Offset Height

Measure the vertical distance available to do the offset.

Close

Minimum Offset Width

Measure the horizontal distance between the 2 vertical chimney lengths, from center to center, that are separated by the offset.

Close

Is there an offset?

It may be necessary to offset the chimney in order for it to pass through an upstairs cupboard or to clear a joist.

Close

Distance with the tee

Measure the distance from the wall radiation shield (or interior wall) to the tee and add 4 inches.

Close

Roof Slope

Measure the vertical rise for every 12" of horizontal distance.

Close

Overall length

• Exterior Installation: Measure from the base of the opening in the wall to the soffit and add the recommended distance in the yellow box.
• Interior Installation: Calculate at least 3" below the finished ceiling near stove up to roof line and add the recommended distance in the yellow box.