Technical Specifications of the RSF Opel2 fireplace

Outside Dimensions	37"W X 47 1/2"H X 24"D
Weight (ship wt add 70 lb)	435 lb
Firewood Length	18"
Firebox Size ( 1 )	3.6 cubic feet
BTU Output Range ( 2 )	10,000 to 70,000
Heating Capacity ( 3 )	1,500 to 3,000 ft2
EPA Certification	note ( 6 )
Chimney	7" Excel
Door Finish	Black, Pewter or 24K Gold Plated
Decorative Trims	N/A
Ash Pan	FO-AP ( 7 )
Gravity Vent Kit	FO-V2
Gravity Vent Damper	FO-D ( 7 )
Electric Wall Thermostat	FO-FDHC4
Heat Dump	FO-HD
Internal Blower	FO-FDHB5-N ( 7 )
Central Heating Blower 635 cfm	FO-FDHB6-1
Central Heating Tee	FO-T
Zone Heating Option	FO-FDHCZ1 & FO-FDHCZ2
Rock Retainer Kit	FO-KP3
Clean Facing	FO-F2 + FO-V2 (2X) ( 8 )
Inline Fan	FO-CIF ( 8 )
Gas Log Provision ( 4 )	YES
Masonry Chimney Option	FO-FDM7
Firescreen	FO-FDFS
Outside Air ( 5 )	4", meets R2000
Mobile Home Approved	NO
Louver or Grill Options	Black, Pewter or Gold Plated Louvers or Classic Cast Grills ( 7 ) or Clean Face

Note 1 :	Based on overall firebox dimensions, EPA official firebox dimensions are smaller.
Note 2 :	Actual BTU output depends on many factors, but primarilly on the quality of the wood burned.
Note 3 :	Depends primarilly on wood quality, ambient air temperature and building heat loss.
Note 4 :	These fireplaces may be drilled out to accept an after market gas log assembly. You may not install a gas lighter in any RSF fireplace because the high firebox temperatures will burn out the log lighter very quickly.
Note 5 :	All RSF models come equipped to accept a 4'' outside air duct, a 5'' can also be used. All models can also be installed to operate using room air.
Note 6 :	The Opel2 is an EPA certified catalytic appliance certified @ 3.7 grams/hour when the optional catalytic combustor (part FO-FDCCO) is installed. The non-catalytic Opel2 is EPA exempt because of the burn rate, but has been certified to by an independent lab to meet EPA standards with a rate of 2.8 grams/hour.
Note 7 :	N/A on Clean Face Opel2 .
Note 8 :	N/A on Louvered Opel2.